3Pcs MAX7219 Dot Matrix Module Microcontroller LED Module Display Module MAX7219 DIY Kit
134
Garantuotas saugus apmokėjimas

Prekės priimamos grąžinti per 40 dienų nuo gavimo datos. Individualios prekės negrąžinamos. Prekės įsigytos su dovanų kuponu gali būti tik keičiamos; grąžinimas negalimas.
Nemokama Dovana
Sveiki atvykę į Roymall, jūsų profesionalią dovanų parduotuvę. Vertiname jūsų paramą ir norėdami parodyti dėkingumą, siūlome nemokamą dovaną su kiekvienu užsakymu.Pristatymo Politika
Prekės pristatomos per 2-5 darbo dienas. Užsakymai virš $9.9 pristatomi nemokamai.1. Grąžinimo Politika
Prekės galima grąžinti per 40 dienų. Individualios prekės negrąžinamos.2.Grąžinimo Sąlygos
Pinigai grąžinami originaliu apmokėjimo būdu.
Description:
u00b7 A single module can drive an 8*8 common negative lattice
u00b7 Module operating voltage: 5V
u00b7 Module size: 3.2 cm long, 3.2 cm wide and 1.5 cm high
u00b7 With 4 fixed screw holes and 3 mm diameter, it can be fixed with M3 copper column.
u00b7 Modules with input and output interfaces support multiple modules cascade
Wiring instructions:
The left side of the module is the input port, and the right side is the output port.
When controlling a single module, you only need to connect the input port to the CPU.
When multiple modules are cascaded, the input end of the first module connects to the CPU, the output end connects to the input end of the second module, the output end of the second module connects to the input end of the third module, and so on.
Take 51 single chip computer as an example:
u00b7 VCC 5V
u00b7 GND GND
u00b7 DIN_P20
u00b7 CS_P21
u00b7 CLK_P22
Package included:
3 x MAX7219 Dot Matrix Module DIY kit
u00b7 A single module can drive an 8*8 common negative lattice
u00b7 Module operating voltage: 5V
u00b7 Module size: 3.2 cm long, 3.2 cm wide and 1.5 cm high
u00b7 With 4 fixed screw holes and 3 mm diameter, it can be fixed with M3 copper column.
u00b7 Modules with input and output interfaces support multiple modules cascade
Wiring instructions:
The left side of the module is the input port, and the right side is the output port.
When controlling a single module, you only need to connect the input port to the CPU.
When multiple modules are cascaded, the input end of the first module connects to the CPU, the output end connects to the input end of the second module, the output end of the second module connects to the input end of the third module, and so on.
Take 51 single chip computer as an example:
u00b7 VCC 5V
u00b7 GND GND
u00b7 DIN_P20
u00b7 CS_P21
u00b7 CLK_P22
Package included:
3 x MAX7219 Dot Matrix Module DIY kit
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking