* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Nemokamas standartinis pristatymas užsakymams virš $9.9
Grąžinimo politika
Prekės priimamos grąžinti per 40 dienų nuo gavimo datos. Individualios prekės negrąžinamos. Prekės įsigytos su dovanų kuponu gali būti tik keičiamos; grąžinimas negalimas.
Nemokama Dovana
Sveiki atvykę į Roymall, jūsų profesionalią dovanų parduotuvę. Vertiname jūsų paramą ir norėdami parodyti dėkingumą, siūlome nemokamą dovaną su kiekvienu užsakymu.
Pristatymo Politika
Prekės pristatomos per 2-5 darbo dienas. Užsakymai virš $9.9 pristatomi nemokamai.
1. Grąžinimo Politika
Prekės galima grąžinti per 40 dienų. Individualios prekės negrąžinamos.
2.Grąžinimo Sąlygos
Pinigai grąžinami originaliu apmokėjimo būdu.
Descriptions:
Auto start voltage will be pulled down to 7V or less, and engine will at high speed when the voltage up to 15V or higher. It is hard to work for 12V electrical equipment, this automatic buck boost module can solve this problem, regardless of the input voltage is 5V or 12V or 32V, the output can be stabilized at 12V.
Built-in 4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
High switching frequency 400KHz, the ripple is smaller, dimension is smaller . (LM2577 frequency only 50KHz)
Applications:
Car regulator, solar photovoltaic, wind power and other applications of voltage instability .
Specifications:
Model Specification: DSN6000AUD Automatic Buck module
Module Properties: Non- isolated boost (BOOST)
Rectification: Non- Synchronous Rectification
Input Range: 3.8V - 32V
Output Range: 1.25V - 35V
Input Current:3A ( max ) , no-load 18mA (5V input , 8V output , no-load is less than 18mA. Higher the voltage, the greater the load current. )
Conversion efficiency:<94% ( the greater the pressure , the lower the efficiency )
Switching frequency:400KHz
Output Ripple:50mV ( the higher the voltage, the greater the current, the greater the ripple )
Load Regulation:± 0.5%
Voltage Regulation:± 0.5%
Operating Temperature:-40 - +85
Dimensions:48mm * 25mm * 14mm ( L * W * H )
Package included:
10 x DC-DC Boost Buck Adjustable Step Up Step Down Automatic Converter XL6009 Module
Hi. Shipment came fast. 6 days to Croatia. Each product in separate bag. Tried and it can not give 0.8A from 3.7 to 12v on 4100mah lipo batt. So no good so far. Will try on 18650 but...
Hi. Shipment came fast. 6 days to Croatia. Each product in separate bag. Tried and it can not give 0.8A from 3.7 to 12v on 4100mah lipo batt. So no good so far. Will try on 18650 but...
Hi. Shipment came fast. 6 days to Croatia. Each product in separate bag. Tried and it can not give 0.8A from 3.7 to 12v on 4100mah lipo batt. So no good so far. Will try on 18650 but...
It is a mighty little module, a great addition and building "brick" for your DIY projects. It starts to give output from about 2.8V and cuts out at 2.7V. Be careful though, when you set your output to a value with the input being 2.8V, the change in the input will result in a great change to the output, but this is not specified/guaranteed mode anyways... It may be necessary to keep the output under certain load to achieve stabilization, I will give it some test later on...
It is a mighty little module, a great addition and building "brick" for your DIY projects. It starts to give output from about 2.8V and cuts out at 2.7V. Be careful though, when you set your output to a value with the input being 2.8V, the change in the input will result in a great change to the output, but this is not specified/guaranteed mode anyways... It may be necessary to keep the output under certain load to achieve stabilization, I will give it some test later on...
It is a mighty little module, a great addition and building "brick" for your DIY projects. It starts to give output from about 2.8V and cuts out at 2.7V. Be careful though, when you set your output to a value with the input being 2.8V, the change in the input will result in a great change to the output, but this is not specified/guaranteed mode anyways... It may be necessary to keep the output under certain load to achieve stabilization, I will give it some test later on...
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-1 of 1|
Show Original
A part of the QA has been auto-translated.
0
Q:
Please can this device convert 12v to 32v or 356v?
Please can this device convert 12v to 32v or 356v?